[Solved] easy one

CAD solution for mold making: slider design, guide rails, jacks,
mold base, components and process, coolant circuit, control via mold levels, creation of drawings, parts lists...

Moderators: remi77, jacs, Daniel

JB
Private
Private
Posts: 4
Joined: Wed Nov 28, 2007 9:55 pm

[Solved] easy one

Unread post by JB »

when loading preliminary inch mold design document when i create a line at a distance say 1 inch the dimension is in metric (25.4)
in my option setting they are in inches
how on earth do you get them to read in inches
thanks
bradbertram
Top'Noob
First Officer Cadet
First Officer Cadet
Posts: 245
Joined: Fri Jun 15, 2007 3:05 pm

Unread post by Top'Noob »

Hi,

Try FILE, PROPERTIES...

Then make sure the "UNITS" and the "DIMENSION"(display format) tabs are set correctly.

Hope this helps ! :)
JB
Private
Private
Posts: 4
Joined: Wed Nov 28, 2007 9:55 pm

Unread post by JB »

Top'Noob wrote:Hi,

Try FILE, PROPERTIES...

Then make sure the "UNITS" and the "DIMENSION"(display format) tabs are set correctly.

Hope this helps ! :)
thanks brad
bradbertram
Post Reply