Search found 68 matches

by RICHARD LALONDE
Mon Oct 29, 2007 6:53 pm
Forum: Suggestions and Enhancements
Topic: What can we wait for the new versions of TopSolid 2008
Replies: 5
Views: 6148

I'm agree with Top'Noob

Please no improvements but fix all tool problem with many compo inside the mold module. Tool std appear wrong position, tool of process wrong position , very useful compo from DME Inch not existing (1/16-27 Pipe plug) etc etc etc
by RICHARD LALONDE
Mon Oct 29, 2007 6:46 pm
Forum: TopSolid'Mold
Topic: [Solved] Angle pin problem
Replies: 2
Views: 4068

Problem solve

Effectively the first time it was because my cam travel was on the wrong side. But after I replace the datum of my slide and not redo the complete slide, in both case the slide was traveling in the good direction but the angle pin was still in the wrong direction. When I redo the slide from scratch ...
by RICHARD LALONDE
Thu Oct 25, 2007 3:19 pm
Forum: TopSolid'Mold
Topic: [Solved] Angle pin problem
Replies: 2
Views: 4068

[Solved] Angle pin problem

Does some one have problem to place an angle pin ? The problem I got is I have a cam stroke and is on good direction when I validate stroke. When I try to put standard angle pin TS ask me surface of cam and surface to put the head ( Top face of cavity plate) The problem is the pin appear with the an...
by RICHARD LALONDE
Fri Oct 19, 2007 1:16 pm
Forum: TopSolid'Draft
Topic: Linewidth to plot
Replies: 3
Views: 5961

You open the config of the plotter and you modify the thickness of the line and you save-it simple as that
by RICHARD LALONDE
Mon Sep 24, 2007 12:58 pm
Forum: TopSolid'Mold
Topic: [Solved] HASCO INCH Mold Bases are wrong.
Replies: 3
Views: 5108

Yes

Yes I am agree I have the same probleme with some mold, we have also advise our reseller who forward the information to Missler and nothing was done. I suggest ALL of us who use the mold module made pressure on our reseller to past the information to Missler to fix that probleme. Because this is par...
by RICHARD LALONDE
Mon Sep 24, 2007 12:50 pm
Forum: TopSolid'Mold
Topic: [Solved] DME Inch and PCS Locating Rings Position is Wrong
Replies: 8
Views: 8143

YES

Yes you are wright, I have advise my reseller about this and he forward my comment to Missler about a year ago and nothing was done upto now, but this is what I found on my side. The ring have the good orientation but the DP is to low (sink complete and the tool was reverse. I suggest you made the s...
by RICHARD LALONDE
Thu Sep 13, 2007 4:00 pm
Forum: Suggestions and Enhancements
Topic: FHCS
Replies: 2
Views: 3571

Missler should fix that

May be the programer in France forget to change the angle of the c'sink from 90° to 82° Missler should fix that soon because it's a big mistake. To modify manualy the thickness of the head to obtain the good angle is a temporary solution, but imagine if you have many FHCS. But for the clearance wh...
by RICHARD LALONDE
Wed Sep 12, 2007 9:21 pm
Forum: Suggestions and Enhancements
Topic: FHCS
Replies: 2
Views: 3571

FHCS

http://img63.imageshack.us/img63/505/small03oj9.th.jpg Hello Missler here in North America FHCS are at 82° not 90° bcs when I import screw from library DME Inch or from Missler library both came with the wrong c'sink. Does some one know how to fix that ? I though is impossible bcs it's a hide par...
by RICHARD LALONDE
Wed Sep 12, 2007 9:20 pm
Forum: TopSolid'Mold
Topic: Flat Head Cap Screw
Replies: 12
Views: 10174

Flat Head Cap Screw

http://img63.imageshack.us/img63/505/small03oj9.th.jpg Hello Missler here in North America FHCS are at 82° not 90° bcs when I import screw from library DME Inch or from Missler library both came with the wrong c'sink. Does some one know how to fix that ? I though is impossible bcs it's a hide par...
by RICHARD LALONDE
Thu Sep 06, 2007 1:48 pm
Forum: TopSolid'Mold
Topic: Using the 64 bit Version
Replies: 2
Views: 3682

what size

When you said large mold design you are talking about how much big ?
Because me I start to crash more often over 175 MG (12 cavity insert + hot-runner etc)
by RICHARD LALONDE
Mon Aug 13, 2007 1:16 pm
Forum: Suggestions and Enhancements
Topic: Mold enhancement request
Replies: 2
Views: 3867

Added document

Bill did a so much greath job with the MOLD MANUEL he wrote, we could suggest to him to made an added section for MUD FRAME. The manual he wrote could be improve with new section when it's a must.
by RICHARD LALONDE
Tue Aug 07, 2007 6:02 pm
Forum: TopSolid'Mold
Topic: [Solved] DME CKPTIC-1 Thermocouple Connector
Replies: 13
Views: 13198

Subject will come taper lock instead thermocouple connector

You could be not agree but before to said that I suggest you to open a standard mold and include DME Inch round taper lock (forget about the length problem) create a quick mold assembly and to understand better made a side view for the core and a side view of the cavity. Now you could made your own ...
by RICHARD LALONDE
Mon Aug 06, 2007 1:55 pm
Forum: TopSolid'Mold
Topic: [Solved] DME CKPTIC-1 Thermocouple Connector
Replies: 13
Views: 13198

I am agrre with you, the visu, you can bypass this problem when you use the detection tool, but this is temporary because on your mold assembly everything come on one side only, core or cavity. Because mold assembly and visu is two thinks completely different
by RICHARD LALONDE
Mon Aug 06, 2007 1:49 pm
Forum: TopSolid'Mold
Topic: Vista
Replies: 9
Views: 10243

Samething on my side I ear the same type of probleme
by RICHARD LALONDE
Fri Jul 20, 2007 3:52 pm
Forum: Off Topic
Topic: Let's introduce ourselves!
Replies: 9
Views: 24846

TopSolid'Mold user

I introduce my self Richard Lalonde Injection Mold Designer since 1980, Yes 27 year experience in mold design. I never got in that time 1day to learn CAM because I was always busy with mold and part design It’s not I didn’t want, it’s just the time who missed. In my carrier I have touch all ki...