Integrated solution for design, manufacturing and management that provides all standard parts and procedures for wood processing.
Moderators: remi77, Daniel, jacs
-
CAD_73
- Major

- Posts: 150
- Joined: Thu Oct 30, 2014 11:59 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.19
- Location: The Netherlands
Post
by CAD_73 » Wed Jun 20, 2018 2:35 pm
I'm wondering if I could change the text "Modifed" to an other name, like CNC
When drilling or sawing a part TopSolid creates the tekst (modified) on my material list.
It would be nicer if it would be possible that TopSolid automaticly add's a part type like CNC on the part

Last edited by
CAD_73 on Fri Nov 23, 2018 8:34 pm, edited 1 time in total.
-
Toddsolid
- Private

- Posts: 5
- Joined: Thu May 17, 2018 12:36 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.18
Post
by Toddsolid » Fri Jun 22, 2018 11:03 pm
(modified) typically shows up on parts that were repetition, duplicates, and the resulting parts after a saw operation, and components that have been changed (modified) from there template or parent part. is that what your referring too?
-
CAD_73
- Major

- Posts: 150
- Joined: Thu Oct 30, 2014 11:59 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.19
- Location: The Netherlands
Post
by CAD_73 » Sat Jun 23, 2018 3:11 pm
Toddsolid wrote: ↑Fri Jun 22, 2018 11:03 pm
(modified) typically shows up on parts that were repetition, duplicates, and the resulting parts after a saw operation, and components that have been changed (modified) from there template or parent part. is that what your referring too?
Yes that what I mean.
-
RaudMees
- Sergeant

- Posts: 57
- Joined: Wed Dec 30, 2015 11:25 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.17
Post
by RaudMees » Fri Aug 24, 2018 8:50 am
Hello
I am in same situation today. Into BOM I can add TopSolid CAM information, but it doesn't work with extruded profiles. For me modified is good enough
I remember, some years ago I had that information in BOM, but I don't remember, what I had in BOM to call it out.
Any ideas?
RM
-
RaudMees
- Sergeant

- Posts: 57
- Joined: Wed Dec 30, 2015 11:25 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.17
Post
by RaudMees » Fri Aug 24, 2018 9:23 am
Maybe TopSolid->Comment will work. Try this. Then You will have (modified), when You use components from library and do some machinings. I changed that(modified) to Yes in top.dic file. Remember, that file will be updated with updates and You may need to make changes again.
RM
-
CAD_73
- Major

- Posts: 150
- Joined: Thu Oct 30, 2014 11:59 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.19
- Location: The Netherlands
Post
by CAD_73 » Fri Nov 23, 2018 8:33 pm
Works for me

Thanks!
Who is online
Users browsing this forum: No registered users and 3 guests