Dear all Friends,
I would like to add index key to "Designation" when defining part.
Thanks alot,
How to add the index key into designation
Moderators: remi77, jacs, Daniel
-
- Second Officer Cadet
- Posts: 209
- Joined: Wed Dec 30, 2015 11:25 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.20
- Contact:
Re: How to add the index key into designation
Hello
I am not a big specialist at this point, but I am afraid it's not possible. Index key and designation are very different things and they are handled different way. Where do You need this index? In draft? There You can make balloon "Indexes with Information" - one row is for index and another for designation. In model You need right file for indexing which shows You designation and index in the tree.
I am not a big specialist at this point, but I am afraid it's not possible. Index key and designation are very different things and they are handled different way. Where do You need this index? In draft? There You can make balloon "Indexes with Information" - one row is for index and another for designation. In model You need right file for indexing which shows You designation and index in the tree.
-
- Sergeant
- Posts: 61
- Joined: Sun Apr 24, 2016 5:34 pm
- TopSolid Module: TopSolid'Steel
- TopSolid Version: 6.21
Re: How to add the index key into designation
Dear RaudMees,
Thank you for answer me. I would like to make this because I would like to mark number in the lable. Then my worker easy to realize the right part according to right file for cnc machining.
I hope we have other ways to do this.
Best regards,
Thank you for answer me. I would like to make this because I would like to mark number in the lable. Then my worker easy to realize the right part according to right file for cnc machining.
I hope we have other ways to do this.
Best regards,
-
- Second Officer Cadet
- Posts: 209
- Joined: Wed Dec 30, 2015 11:25 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.20
- Contact:
Re: How to add the index key into designation
Hello sinvia
There is an another way to do this. I made labels years ago where I added a slot for Index. You have to know, it's not just Index, it's 3D Index and they will be generated automatically with some clicks.
RM
There is an another way to do this. I made labels years ago where I added a slot for Index. You have to know, it's not just Index, it's 3D Index and they will be generated automatically with some clicks.
RM
-
- Sergeant
- Posts: 61
- Joined: Sun Apr 24, 2016 5:34 pm
- TopSolid Module: TopSolid'Steel
- TopSolid Version: 6.21
Re: How to add the index key into designation
Dear Raudmees,
It hear great. If you dont mind, pls share the way.
Thanks,
It hear great. If you dont mind, pls share the way.
Thanks,
-
- Second Officer Cadet
- Posts: 209
- Joined: Wed Dec 30, 2015 11:25 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.20
- Contact:
Re: How to add the index key into designation
I made short video about this. The most important thing is to make correct Index.bom with identification row, otherwise You may have different geometries with same index. To avoid indexing for fittings (like dowel in my video) You will have to use filters.
https://www.youtube.com/watch?v=GQxPHRmoJBs
I hope it helps
RM
https://www.youtube.com/watch?v=GQxPHRmoJBs
I hope it helps
RM
-
- Private First Class
- Posts: 15
- Joined: Sat Jun 16, 2018 10:16 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.19
Re: How to add the index key into designation
Hello everyone.
when i need an index with a mapping in the assembly name plus a sequence number in the project.
https://youtu.be/AHXzVXUTGeo
when i need an index with a mapping in the assembly name plus a sequence number in the project.
https://youtu.be/AHXzVXUTGeo