BOM

Drawing, bill of material, 2D design, dimensioning, labeling, tolerances, symbols, title blocks...

Moderators: remi77, jacs, Daniel

kiwdwks
Private First Class
Private First Class
Posts: 13
Joined: Sat Jul 19, 2008 2:58 am
Location: San Leandro, California
Contact:

BOM

Unread post by kiwdwks »

Can anyone please advise me? For some reason the text and dimensions in my bom are running vertically instead of horizontally along the width of my bom columns. Since there is not enough room in the height, all the text and dimensions are not readable (scrunched together). I'll attach a pic to show what is happening. I can't seem to find any place to control the orientation of the bom text.

This is something new with this document. If I go to a previous job and add a new bom there, it works fine there.

Thank you,
Mark
Attachments
Picture of the problem with my BOM.
Picture of the problem with my BOM.
Post Reply