Line weight Draft Save As PDF

Drawing, bill of material, 2D design, dimensioning, labeling, tolerances, symbols, title blocks...

Moderators: remi77, jacs, Daniel

Post Reply
Joppe
Private First Class
Private First Class
Posts: 16
Joined: Tue Jun 14, 2011 6:37 pm

Line weight Draft Save As PDF

Post by Joppe » Tue Jan 17, 2017 9:27 am

Is there a way to adjust the line weight when saving a draft as a PDF file ? My lines are way to thick and I can't seem to figure out how to adjust this.

ken
Private First Class
Private First Class
Posts: 18
Joined: Fri Jul 08, 2016 5:12 pm
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.17

Re: Line weight Draft Save As PDF

Post by ken » Thu Feb 02, 2017 8:30 pm

Yes, It is controlled by the printer configuration file stored in Missler>V617>bin>printer folder. You can see which one you have selected when you select the drawing boarder using the modify element command (Wrench) and select the printer tab.
printer config.jpg
For some reason, I had to modify the actual config file using note pad to get it to stick. If you print a drawing by going File>Print, you can select the configuration button and see everything in the configuration file in a visual format but any changes I made there only lasted for that one printing.
Ken Hale

Gray Bell Millworks
www.graybellmillwork.com

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest