[Solved] saving as *.dwg crashes???

Drawing, bill of material, 2D design, dimensioning, labeling, tolerances, symbols, title blocks...

Moderators: remi77, Daniel, jacs

Post Reply
frankm
Private
Private
Posts: 8
Joined: Fri Mar 09, 2007 1:39 pm
Location: Neunkirchen/Saarland

[Solved] saving as *.dwg crashes???

Post by frankm » Wed Sep 26, 2007 2:01 pm

Hi all,

new spatial translator for our 64 bit version, new problems :roll:

has anyone found a solution for saving drawings as *.dwg files, because one of our customer can read Acad files only.
It works fine with the 32 bit version, but a second installation of the 32 bit version on a 64 bit machine with a already installed 64 bit version is imposible. :shock:

greetings from germany

frank

User avatar
Bill
Master Chief
Master Chief
Posts: 116
Joined: Wed Feb 21, 2007 8:17 pm
TopSolid Module: TopSolid'Design
TopSolid Version: 7.6
Location: Chicago
Contact:

regarding DWG crashes

Post by Bill » Tue Oct 02, 2007 9:06 pm

Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?
Happy Designing
Bill
Technical Director
Missler Software Inc

frankm
Private
Private
Posts: 8
Joined: Fri Mar 09, 2007 1:39 pm
Location: Neunkirchen/Saarland

Re: regarding DWG crashes

Post by frankm » Thu Oct 04, 2007 3:13 pm

Bill wrote:Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?
Both translators crashes, latest patch is installed

frankm
Private
Private
Posts: 8
Joined: Fri Mar 09, 2007 1:39 pm
Location: Neunkirchen/Saarland

Post by frankm » Sat Oct 13, 2007 11:25 am

Posted: Thu Oct 04, 2007 1:13 pm Post subject: Re: regarding DWG crashes

--------------------------------------------------------------------------------

Bill wrote:
Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?


Both translators crashes, latest patch is installed
Good news, patch 236 solved the problem :D

greets

frank

DownFloppy
Private
Private
Posts: 8
Joined: Thu Aug 16, 2007 7:43 am

Post by DownFloppy » Tue Nov 13, 2007 9:57 am

frankm wrote:
Posted: Thu Oct 04, 2007 1:13 pm Post subject: Re: regarding DWG crashes

--------------------------------------------------------------------------------

Bill wrote:
Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?


Both translators crashes, latest patch is installed
Good news, patch 236 solved the problem :D

greets

frank
Not really solved (only 3D). Draft/2D is not possible.

frankm
Private
Private
Posts: 8
Joined: Fri Mar 09, 2007 1:39 pm
Location: Neunkirchen/Saarland

Post by frankm » Wed Nov 21, 2007 12:19 pm

DownFloppy wrote:
frankm wrote:
Posted: Thu Oct 04, 2007 1:13 pm Post subject: Re: regarding DWG crashes

--------------------------------------------------------------------------------

Bill wrote:
Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?


Both translators crashes, latest patch is installed
Good news, patch 236 solved the problem :D

greets

frank
Not really solved (only 3D). Draft/2D is not possible.

Ups, you are right, doesn`t work correctly, let´s wait for the next patch :cry:

frank

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests