Dimension text
Moderators: remi77, jacs, Daniel
- CAD_73
- Second Officer Cadet
- Posts: 207
- Joined: Thu Oct 30, 2014 11:59 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: The Netherlands
Dimension text
I can't seem to find a way to have my dimension text vertical (parallel to the dimension Lines) instead of the standar horizontal way.
Last edited by CAD_73 on Sun Dec 20, 2015 2:57 pm, edited 2 times in total.
-
- Chief
- Posts: 107
- Joined: Mon Mar 26, 2007 9:40 am
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 6.26
- Location: The netherlands
- Contact:
Re: Dimension text
I think it is the standard to make the text parallel to the dim. line. So can you show in a picture what you problem is?
Regards
Mark
Regards
Mark
-
- Chief
- Posts: 107
- Joined: Mon Mar 26, 2007 9:40 am
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 6.26
- Location: The netherlands
- Contact:
Dimension text
Do you use à template? Is yes which one? If no what selection do you make in terms of the standard?
Grz
Mark
Grz
Mark
- CAD_73
- Second Officer Cadet
- Posts: 207
- Joined: Thu Oct 30, 2014 11:59 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: The Netherlands
Re: Dimension text
Hi Mark,
For now I wasn’t using any template.
I’m trying to create my own template but this is one of the things I couldn’t change.
When I use Free A3 Horizontal mm the text is vertically reading, but still I want my dimension in the middle of the line, not above the line
For now I wasn’t using any template.
I’m trying to create my own template but this is one of the things I couldn’t change.
When I use Free A3 Horizontal mm the text is vertically reading, but still I want my dimension in the middle of the line, not above the line
-
- Chief
- Posts: 107
- Joined: Mon Mar 26, 2007 9:40 am
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 6.26
- Location: The netherlands
- Contact:
Re: Dimension text
That' s not a problem. This setting you can find in either the application options (Tools-options-dimension) or in the document properties (file-properties) if you find it in this last one you have to set it when your template is empty and open. Set the setting and save your template in config\template
Good luck
Mark
Good luck
Mark
-
- Private
- Posts: 2
- Joined: Wed Aug 29, 2012 8:53 pm
- Location: Markham
Re: Dimension text
Hi. When I have been creating a draft document. I set the text direction with Tools-Dimension Style-Advanced Options then check box Text Direction and highlite what I want for length and angle.
Steve.
TopSolid 7.8
Steve.
TopSolid 7.8
-
- Chief
- Posts: 107
- Joined: Mon Mar 26, 2007 9:40 am
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 6.26
- Location: The netherlands
- Contact:
Re: Dimension text
Yes but we are talking version 6.14 not version 7.x [emoji3]
-
- Private
- Posts: 2
- Joined: Wed Aug 29, 2012 8:53 pm
- Location: Markham
Re: Dimension text
Ahh my bad, I did wonder.
Steve
Steve
- CAD_73
- Second Officer Cadet
- Posts: 207
- Joined: Thu Oct 30, 2014 11:59 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: The Netherlands
Re: Dimension text
Still havn't found the right way
When using the Modify Element (wrench tool) I can change it like the PrintScreen. But when using Tools>Options>Dimensions there is no such option.
When using the Modify Element (wrench tool) I can change it like the PrintScreen. But when using Tools>Options>Dimensions there is no such option.