Full Section in another scale?

Drawing, bill of material, 2D design, dimensioning, labeling, tolerances, symbols, title blocks...

Moderators: remi77, jacs, Daniel

User avatar
CAD_73
Second Officer Cadet
Second Officer Cadet
Posts: 207
Joined: Thu Oct 30, 2014 11:59 pm
Answers: 2
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.24
Location: The Netherlands

Full Section in another scale?

Unread post by CAD_73 »

Is there a way to make a Full Section in another scale?

Like I have this front view 1:10 and I would like my Full Section 1:1 so I can make the Interrupted View.
Last edited by CAD_73 on Mon Feb 16, 2015 8:58 pm, edited 1 time in total.
Senior Engineer 3D
Luxurious (Yacht) Interiors

My YouTube channel
Mark Oostveen
Chief
Chief
Posts: 107
Joined: Mon Mar 26, 2007 9:40 am
TopSolid Module: TopSolid'Cam
TopSolid Version: 6.26
Location: The netherlands
Contact:

Re: Full Section in another scale?

Unread post by Mark Oostveen »

Yes

Like you can change it in each other type of auxiliary view. Use the wrench and select the frame of the view to edit the basic settings. Directly at the top you will see lookalike definition of the scale. Use this to break the link of the scale between the reference view and this view. Type the factor you want in the box.
At the bottom of this same window you can also switch on a title containing the scale.

Grz

Mark
User avatar
CAD_73
Second Officer Cadet
Second Officer Cadet
Posts: 207
Joined: Thu Oct 30, 2014 11:59 pm
Answers: 2
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.24
Location: The Netherlands

Re: Full Section in another scale?

Unread post by CAD_73 »

Thanks, it works :)
section.PNG
Senior Engineer 3D
Luxurious (Yacht) Interiors

My YouTube channel
Post Reply