LIP Samples
Moderators: remi77, jacs, Daniel
- TopSolid2007
- Master Chief
- Posts: 133
- Joined: Thu May 10, 2007 4:28 pm
- Location: São Bernardo do Campo - SP
- Contact:
LIP Samples
Hi...
Could any one share some lip samples with me? It would be great because I am trying to understand this application...
Could any one share some lip samples with me? It would be great because I am trying to understand this application...
Hi,
COM API isn't complete so you must use a combination of LIP and API for some functions.
Look at viewtopic.php?t=105 for an exemple.
COM API isn't complete so you must use a combination of LIP and API for some functions.
Look at viewtopic.php?t=105 for an exemple.
Ptilu
- TopSolid2007
- Master Chief
- Posts: 133
- Joined: Thu May 10, 2007 4:28 pm
- Location: São Bernardo do Campo - SP
- Contact:
Hello guys...
I am trying to make a command using LIP or API to make as follow
1. Create a offset curve with 12.5mm distance.
2. Divide the resultant curve in "n" segments
3. Extend all "n" segments the lenght of -30mm
4. Explode this curve
5. Create a circle with 23mm diameter on the begining of each segment.
I need make it several times per day. It would help me a lot if I could do all this operations just in one command.
I am trying to make a command using LIP or API to make as follow
1. Create a offset curve with 12.5mm distance.
2. Divide the resultant curve in "n" segments
3. Extend all "n" segments the lenght of -30mm
4. Explode this curve
5. Create a circle with 23mm diameter on the begining of each segment.
I need make it several times per day. It would help me a lot if I could do all this operations just in one command.
- TopSolid2007
- Master Chief
- Posts: 133
- Joined: Thu May 10, 2007 4:28 pm
- Location: São Bernardo do Campo - SP
- Contact:
- TopSolid2007
- Master Chief
- Posts: 133
- Joined: Thu May 10, 2007 4:28 pm
- Location: São Bernardo do Campo - SP
- Contact:
-
- Master Corporal
- Posts: 43
- Joined: Fri Apr 29, 2011 7:16 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.17
- Location: Hannover
- Contact:
a late answer is also a good answer
to execute a .lob file you need to add a new menu entry in TopSolid.
1. go in your config-path (example: C:\Missler\config)
2. edit or create the file "topext.men" with a text-editor
3. add at the end in the "topext.men" a new menu entry:
4. add your button in your menu entry:
the code "#0,11,0,1" is a icon code.
see viewtopic.php?t=56&highlight=icon
5. add the "close" of your menu entry:
The complete code is:
Now you have a new menu entry in TopSolid.
Inside this menu entry is one command that start your .lob file.
The same entrys you can make in the left main toolbox
It is only possible to rewrite the complete toolbox:
1. copy the needed .icn from "C:\Missler\V6x\bin" to
"C:\Missler\Konfig\V6x"
Design - design.icn
Draft - draft.icn
Wood - wood.icn
...
2. Edit the copyed .icn . Don't delete original code. Only add your new entrys.
( After an update of TS check the original .icn for changes.)
to execute a .lob file you need to add a new menu entry in TopSolid.
1. go in your config-path (example: C:\Missler\config)
2. edit or create the file "topext.men" with a text-editor
3. add at the end in the "topext.men" a new menu entry:
Code: Select all
%your menu entry {
Code: Select all
"your button" #0,11,0,1 = $TOPCONFIG/your path to your .lob/lobfilename ;
see viewtopic.php?t=56&highlight=icon
5. add the "close" of your menu entry:
Code: Select all
}
Code: Select all
%your menu entry {
"your button" #0,11,0,1 = $TOPCONFIG/your path to your .lob/lobfilename ;
}
Inside this menu entry is one command that start your .lob file.
The same entrys you can make in the left main toolbox
It is only possible to rewrite the complete toolbox:
1. copy the needed .icn from "C:\Missler\V6x\bin" to
"C:\Missler\Konfig\V6x"
Design - design.icn
Draft - draft.icn
Wood - wood.icn
...
2. Edit the copyed .icn . Don't delete original code. Only add your new entrys.
( After an update of TS check the original .icn for changes.)