I am a beginner. I am using TopSolid 7.9.
I have a sheetmetal part that has a bend along a Line.
My aim is to Unbend that part & extract the BendLine information like startPoint, endPoint etc.
I have tried searching the API help, but couldn't find anything.
(Technology: .Net C#)
Can I get some guidance on how to do this? Any help/links/code will be highly appreciated.
-
Nikhil
How to UnBend a sheetmetal part & extract Bendline Info?
Moderators: remi77, jacs, Daniel
-
- Private First Class
- Posts: 18
- Joined: Tue Sep 08, 2015 11:04 am
- TopSolid Module: TopSolid'Design
- TopSolid Version: 6.25
-
- Master Corporal
- Posts: 49
- Joined: Tue Sep 29, 2015 2:48 pm
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 6.26
Re: How to UnBend a sheetmetal part & extract Bendline Info?
hello!
i've been looking on the API and i haven't found something about it...
i can get an element, but not an "element of element"
this arc is inside the element of sketh or bend operation...
i've been looking on the API and i haven't found something about it...
i can get an element, but not an "element of element"
this arc is inside the element of sketh or bend operation...
-
- Private First Class
- Posts: 18
- Joined: Tue Sep 08, 2015 11:04 am
- TopSolid Module: TopSolid'Design
- TopSolid Version: 6.25
Re: How to UnBend a sheetmetal part & extract Bendline Info?
Hi,
Thanks for looking into it.
I can get the bend operation from the part but can't get the sketch along which it was bent.
How can I proceed further?
Thanks for looking into it.
I can get the bend operation from the part but can't get the sketch along which it was bent.
How can I proceed further?
-
- Chief
- Posts: 107
- Joined: Mon Mar 26, 2007 9:40 am
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 6.26
- Location: The netherlands
- Contact:
Re: How to UnBend a sheetmetal part & extract Bendline Info?
Hi,
I don't realy understand what you want to do. Can you explain. Why do you want to extract the bending information and why do you need the line?
In most cases I try to not directly startup C# but first define the speps I need manualy to get what I want. If I can see the data somewhere else other than in the operation it is possible there is some kind of way to get it. I try to make several manual solution so if one of them has a dead end I can try antother. The advantage is that sometimes I can only automate a part of the steps, but that could also be a gain.
last but not least. Why do I want to automate? How many time will it take to do it manually and how often do I have to do it? Is it worth automating. In a lot of cases I don't want to do something manualy because I have like one time a lot, and than sometimes some new ones. Realisicly I can better start just do the lot because investigating automation takes more time (athough it is more fun )
Regards
mark
I don't realy understand what you want to do. Can you explain. Why do you want to extract the bending information and why do you need the line?
In most cases I try to not directly startup C# but first define the speps I need manualy to get what I want. If I can see the data somewhere else other than in the operation it is possible there is some kind of way to get it. I try to make several manual solution so if one of them has a dead end I can try antother. The advantage is that sometimes I can only automate a part of the steps, but that could also be a gain.
last but not least. Why do I want to automate? How many time will it take to do it manually and how often do I have to do it? Is it worth automating. In a lot of cases I don't want to do something manualy because I have like one time a lot, and than sometimes some new ones. Realisicly I can better start just do the lot because investigating automation takes more time (athough it is more fun )
Regards
mark
-
- Chief
- Posts: 107
- Joined: Mon Mar 26, 2007 9:40 am
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 6.26
- Location: The netherlands
- Contact:
Re: How to UnBend a sheetmetal part & extract Bendline Info?
I saw you post in introduction and now understand a bit better you question.
Just a wild guess of what could be possible. Don't have a TopSolid in front of me right now...
Get the shape, get the faces. Check face types and search cilinders. It might be possible to get the data of the cilinder? Is that data enough or do you need more?
Mark
Just a wild guess of what could be possible. Don't have a TopSolid in front of me right now...
Get the shape, get the faces. Check face types and search cilinders. It might be possible to get the data of the cilinder? Is that data enough or do you need more?
Mark