What is "Shank Maximal(Minimal) diameter"?

Everything about new TopSolid'Cam 7 software.

Moderators: remi77, Daniel, Bill

Post Reply
User avatar
michelle
Sergeant
Sergeant
Posts: 53
Joined: Sun Sep 20, 2009 7:45 pm
TopSolid Version: 7.8

What is "Shank Maximal(Minimal) diameter"?

Post by michelle » Wed Oct 11, 2017 3:52 pm

Hello,

I'm using the Machining Component Wizard to define a toolholder. I am a bit confused about the fields which are requested below.

Questions:
1. What is a "Publishing"
2. For the attached screenshot, what is Shank Maximal diameter? a, b, c, d, or e?
3. For the attached screenshot, what is Shank Minimal diameter? a, b, c, d, or e?
4. How significant are these values and how will TopSolid use them?
SCREENSHOT.png
Thanks again,
Michelle

User avatar
remi77
Administator
Administator
Posts: 227
Joined: Thu Feb 22, 2007 10:05 am
Contact:

Re: What is "Shank Maximal(Minimal) diameter"?

Post by remi77 » Wed Oct 11, 2017 4:25 pm

Hi

Shank minimal is the smallest Ø of a tool shank you can't (this is the same for maximal), for example if you set the minimal value at 6,in this case, you can't mount a mill (or dril etc...) with a Ø5 shank.

These fields are used as filters

See you

Rémi :wink:
Thanks to tag your topic as solved Image when you've got the solution.

AndiKS
Corporal
Corporal
Posts: 21
Joined: Fri Jul 31, 2009 10:43 am
TopSolid Module: TopSolid'Cam
TopSolid Version: 7.8

Re: What is "Shank Maximal(Minimal) diameter"?

Post by AndiKS » Wed Oct 11, 2017 6:56 pm

remi77 wrote:
Wed Oct 11, 2017 4:25 pm
These fields are used as filters
It would be perfect, if TopSolid would use these values to filter the components

But this does not work! TopSolid show always all components.. :(

Work this for you?

User avatar
michelle
Sergeant
Sergeant
Posts: 53
Joined: Sun Sep 20, 2009 7:45 pm
TopSolid Version: 7.8

Re: What is "Shank Maximal(Minimal) diameter"?

Post by michelle » Wed Oct 11, 2017 10:07 pm

Hi Remi

Do you mean that "shank min/max diameter" actually refers to the *INNER* diameter of the tool holder where the actual tool will fit inside of?

I had assumed it means the outside diameter and could not understand why this was significant.

(Sorry Andi I don't have an answer to your question)

Thanks
Michelle

User avatar
remi77
Administator
Administator
Posts: 227
Joined: Thu Feb 22, 2007 10:05 am
Contact:

Re: What is "Shank Maximal(Minimal) diameter"?

Post by remi77 » Thu Oct 12, 2017 6:00 am

Hi to all

No Andyks, I did not check it yet, however it works for searching criteria :wink:. This enables you find tool holder between min/max values.

Michelle wrote :
Do you mean that "shank min/max diameter" actually refers to the *INNER* diameter of the tool holder where the actual tool will fit inside of?
Yes, that's it. In fact, it should match with the shank of the cutting tool.

See you

Rémi :wink:
Thanks to tag your topic as solved Image when you've got the solution.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest