hi,
I am very new to TopSolid , is it possible to create compound angle using frame. like rotate about x axis to 6 deg and y axis to 8 deg.
regards
E.PAULSON
Compound angle
Moderators: remi77, jacs, Daniel, Bill, Romain
-
- Corporal
- Posts: 20
- Joined: Fri Jun 24, 2016 1:37 pm
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 7.6
- Location: Huntsville, AL
Re: Compound angle
You can create pivoted frames (construction/ frames/ pivoted frame) or pivoted planes (construction/ planes/ pivoted plane).
Re: Compound angle
hi Billetgrip
I could finish the part with Pivoted frame , thanks for the support
I could finish the part with Pivoted frame , thanks for the support
Re: Compound angle
Hi
Thanks to tag your topic as solved with the green check
I've done the job for you concerning this topic.
See you
Remi
Thanks to tag your topic as solved with the green check
I've done the job for you concerning this topic.
See you
Remi
Thanks to use the on the best answer when you've got the solution.