Compound angle

Forum about TopSolid'Design 7 release.

Moderators: remi77, jacs, Daniel, Bill, Romain

Esau
Private
Private
Posts: 7
Joined: Sun Jan 13, 2019 6:20 pm

Compound angle

Unread post by Esau »

hi,
I am very new to TopSolid , is it possible to create compound angle using frame. like rotate about x axis to 6 deg and y axis to 8 deg.

regards
E.PAULSON
Billetgrip
Corporal
Corporal
Posts: 20
Joined: Fri Jun 24, 2016 1:37 pm
TopSolid Module: TopSolid'Cam
TopSolid Version: 7.6
Location: Huntsville, AL

Re: Compound angle

Unread post by Billetgrip »

You can create pivoted frames (construction/ frames/ pivoted frame) or pivoted planes (construction/ planes/ pivoted plane).
Esau
Private
Private
Posts: 7
Joined: Sun Jan 13, 2019 6:20 pm

Re: Compound angle

Unread post by Esau »

hi Billetgrip
I could finish the part with Pivoted frame , thanks for the support
User avatar
remi77
Administator
Administator
Posts: 348
Joined: Thu Feb 22, 2007 10:05 am
Contact:

Re: Compound angle

Unread post by remi77 »

Hi

Thanks to tag your topic as solved with the green check :mrgreen:

I've done the job for you concerning this topic.

See you

Remi :wink:
Thanks to use the Image on the best answer when you've got the solution.
Post Reply