Dear Forum
I succeeded in designing a bass clarinet mouthpiece in TopSolid.
But now I wanted to export it as stl to make a 3D printed prototype.
The problem now is that the stl export is incomplete. Only the grey bottom shape is exported.
The basic part is composed out of 2 shapes. That are trimmed using about 10 shapes surface.
Do I have to render something?
kind regards Johan Jonker
STL export is incomplete
Moderators: remi77, jacs, Daniel, Bill, Romain
-
- Private First Class
- Posts: 15
- Joined: Sun Nov 05, 2017 9:13 am
- TopSolid Module: TopSolid'Design
- TopSolid Version: 6.20
- Contact:
- JuP
- Major
- Posts: 169
- Joined: Tue Sep 09, 2014 5:45 pm
- TopSolid Module: TopSolid'Steel
- TopSolid Version: 7.14
Re: STL export is incomplete
Hello!
TopSolid work with representations, have a look on them to be sure that you have you two forms. If not, drag your form on the wanted representation.
Keep us in touch !
TopSolid work with representations, have a look on them to be sure that you have you two forms. If not, drag your form on the wanted representation.
Keep us in touch !
-
- Private First Class
- Posts: 15
- Joined: Sun Nov 05, 2017 9:13 am
- TopSolid Module: TopSolid'Design
- TopSolid Version: 6.20
- Contact:
Re: STL export is incomplete
Hello Julien, thanks for reacting.
I did not understand the purpose of the three different representations.
When I export to STL I see now that I can select the type of representation.
That helps. It looks better in the standard windows viewer.
But it gives an failed to load in Cura .
I did not understand the purpose of the three different representations.
When I export to STL I see now that I can select the type of representation.
That helps. It looks better in the standard windows viewer.
But it gives an failed to load in Cura .
- JuP
- Major
- Posts: 169
- Joined: Tue Sep 09, 2014 5:45 pm
- TopSolid Module: TopSolid'Steel
- TopSolid Version: 7.14
Re: STL export is incomplete
Sometime you need to have alternative representations. This can be for to make light cad models for drafting (without fasteners for example), parts with less details ...I did not understand the purpose of the three different representations.
Ah ok I understand. Most of popular 3d printing software doesn't work with multishapes stl. In TopSolid 7.11 we add a new option when you export with stl format: Otherwise just make an union (boolean operation) beetween you two forms, you will obtain the same result.But it gives an failed to load in Cura .
-
- Private First Class
- Posts: 15
- Joined: Sun Nov 05, 2017 9:13 am
- TopSolid Module: TopSolid'Design
- TopSolid Version: 6.20
- Contact:
Re: STL export is incomplete
Some weeks later I encounter the error again. But also found the solution.
When you have a part build up from several shapes and then export the representation of the collection of these shapes. It will result in an stl file that gives an error in Cura and other programs. But not in WIndows print 3D.
When you union all shapes to one shape. It will result in an stl file that give no error in Cura.
When you have a part build up from several shapes and then export the representation of the collection of these shapes. It will result in an stl file that gives an error in Cura and other programs. But not in WIndows print 3D.
When you union all shapes to one shape. It will result in an stl file that give no error in Cura.