Dear TopSolid forum,
I am new to the TopSolid environment and want to implement some complex shapes in TopSolid.
One of the things that I try is to define a shape with curve to formula.
So I define two simple curves that touch each other. Then complete it to a closed shape with a 2D sketch.
When I want to extrude this only the curve that I select is extruded and not the complete shape.
What do I do wrong?
regards Johan
from curve to formula to extruded shape
Moderators: remi77, jacs, Daniel, Bill, Romain
-
- Private First Class
- Posts: 15
- Joined: Sun Nov 05, 2017 9:13 am
- TopSolid Module: TopSolid'Design
- TopSolid Version: 6.20
- Contact:
- Bill
- Master Chief
- Posts: 115
- Joined: Wed Feb 21, 2007 8:17 pm
- TopSolid Module: TopSolid'Design
- TopSolid Version: 6.25
- Location: Chicago
- Contact:
Re: from curve to formula to extruded shape
Are all segments of the curve in the same sketch? If not project them into a sketch.Johan Jonker wrote:Dear TopSolid forum,
I am new to the TopSolid environment and want to implement some complex shapes in TopSolid.
One of the things that I try is to define a shape with curve to formula.
So I define two simple curves that touch each other. Then complete it to a closed shape with a 2D sketch.
When I want to extrude this only the curve that I select is extruded and not the complete shape.
What do I do wrong?
regards Johan
I suggest doing the design tutorial that ships with the software. You can also find additional tutorials on the TopSolid'Blog here
http://blog.TopSolid.com/category/tutorials/
Scroll to the bottom and start with design
Good luck
Bikl
Sent from my Pixel XL using Tapatalk
Happy Designing
Bill
Technical Director
Missler Software Inc
Bill
Technical Director
Missler Software Inc
-
- Private First Class
- Posts: 15
- Joined: Sun Nov 05, 2017 9:13 am
- TopSolid Module: TopSolid'Design
- TopSolid Version: 6.20
- Contact: