I would like to have a board for a graphics card for TopSolid 7
I have an i7 processor 64-bit windows 8 ram 16g
I have problems with the update rough times
I saw the video on you tube with the i7 processor but it seems very fast!?
I have to buy a new Nvidia graphics card but do not know which
Missler recommend me a graphics card square with 2g ram what do you recommend?
I attach a link with various graphics cards epossibile s advice
thanks
http://www.breakpoint.it/I/V/Nvidia/nvidia_W2.asp
graphics card top 7
Moderators: remi77, jacs, Daniel
-
- Master Corporal
- Posts: 43
- Joined: Thu Oct 21, 2010 3:22 pm
graphics card
thanks for the reply
I have problems updating raw
I've seen it takes a long time to update the processing and material
I do not know if the graphics card can affect this process
with update, and collision detection activated TopSolid works very slow
use the verification environment is not the same thing of updating the rough during the machining
I do not know how to solve?
possible that a new software as top7 not be able to manage updates material in real time?
an update on the complex machining can last almost an hour!
thanks for the answers
I have problems updating raw
I've seen it takes a long time to update the processing and material
I do not know if the graphics card can affect this process
with update, and collision detection activated TopSolid works very slow
use the verification environment is not the same thing of updating the rough during the machining
I do not know how to solve?
possible that a new software as top7 not be able to manage updates material in real time?
an update on the complex machining can last almost an hour!
thanks for the answers
- Bill
- Master Chief
- Posts: 115
- Joined: Wed Feb 21, 2007 8:17 pm
- TopSolid Module: TopSolid'Design
- TopSolid Version: 6.25
- Location: Chicago
- Contact:
Hi there,
For the stock update, have you tried using the "faceted" mode? If you are doing very complex machining, this will save you a lot of time. In the video you mentioned, do you know if they did true solid update or faceted update. it could be the faceted.
For the stock update, have you tried using the "faceted" mode? If you are doing very complex machining, this will save you a lot of time. In the video you mentioned, do you know if they did true solid update or faceted update. it could be the faceted.
Happy Designing
Bill
Technical Director
Missler Software Inc
Bill
Technical Director
Missler Software Inc