Dear users,
Hallo,
Im a new user of TS 7.10 CAD CAM and face the following isues.
I have a DELL precision M6800 workstation with an i7 @2.8ghz processor,
32gb of ram, an nvidia k4100m gpu and an 500gb ssd. When simulating with
materila removal in either simple or complex parts, the program runs very very slow.
i have allready replaced motherboard, cpu, hdd, and gpu. Furthermore i have also tried multiple versions of drivers. Please note that this machine has
multiple gpus one on the processor and the nvidia.
Is there a specific setting value that i have to set, in the ts and in the
nvidia interface? it feels like the ts does not use the nvidia at all because when i disable the nvidia the behaviour of the programm remains the same.
Than you very much,
Apostolis
Quadro k4100m
Moderators: remi77, jacs, Daniel
- JuP
- Major
- Posts: 169
- Joined: Tue Sep 09, 2014 5:45 pm
- TopSolid Module: TopSolid'Steel
- TopSolid Version: 7.14
Re: Quadro k4100m
Hi,
I have almost this configuration without problem and special setting, but I use TopSolid just for the design...
Dell M6700
Intel i7-3740QM 2.7Ghz Turbo 3.4
NVIDIA Quadro K4000M
12 go ram 667 MHz
Try to go in options (Tools / options) and verify this values:
I have almost this configuration without problem and special setting, but I use TopSolid just for the design...
Dell M6700
Intel i7-3740QM 2.7Ghz Turbo 3.4
NVIDIA Quadro K4000M
12 go ram 667 MHz
Try to go in options (Tools / options) and verify this values: