How do I get the smaller parts to nest around the larger parts?
See photo.
Thanks
John
Nesting issue
Moderators: remi77, jacs, Daniel, Liam
- jhw3
- Private
- Posts: 7
- Joined: Thu Jan 15, 2015 7:40 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.15
Nesting issue
John Wilson
Skyline Cabinets
Bakersfield, California
TopSolid Wood & Cam
AutoCad 2017
Cabnetware 12
S2M 6
Biesse Rover G 5x12 Flat Table
Weeke ABD 060 Horizontal Boring
Skyline Cabinets
Bakersfield, California
TopSolid Wood & Cam
AutoCad 2017
Cabnetware 12
S2M 6
Biesse Rover G 5x12 Flat Table
Weeke ABD 060 Horizontal Boring
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: Nesting issue
by larger parts i assume your talking about the middle sheet have the rectangular parts nested following the larger curved part instead of being packed into the bottom left corner?
the only way i know of is not automatic you will have to move/rotate them manually. because there is not enough parts to fill that middle sheet its not packing them closer and it appears that you only allowed your parts to rotate 90 degrees when you nested them
make sure you have rotation set for something like 1 degree on that middle sheet and that you used complex nesting when you started the nest
the only way i know of is not automatic you will have to move/rotate them manually. because there is not enough parts to fill that middle sheet its not packing them closer and it appears that you only allowed your parts to rotate 90 degrees when you nested them
make sure you have rotation set for something like 1 degree on that middle sheet and that you used complex nesting when you started the nest
- jhw3
- Private
- Posts: 7
- Joined: Thu Jan 15, 2015 7:40 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.15
Re: Nesting issue
It was priority along with rotation.
Thanks!
Thanks!
John Wilson
Skyline Cabinets
Bakersfield, California
TopSolid Wood & Cam
AutoCad 2017
Cabnetware 12
S2M 6
Biesse Rover G 5x12 Flat Table
Weeke ABD 060 Horizontal Boring
Skyline Cabinets
Bakersfield, California
TopSolid Wood & Cam
AutoCad 2017
Cabnetware 12
S2M 6
Biesse Rover G 5x12 Flat Table
Weeke ABD 060 Horizontal Boring