Does TopSolid Wood Cam have the ability to automatically insert "dog-bones" on an inside corner?
Maybe even manually?
Or is this something that needs to be done back in the sketch?
Please see attached PDF.
Thanks
John
"Dog-Bone"
Moderators: remi77, jacs, Daniel, Liam
- jhw3
- Private
- Posts: 7
- Joined: Thu Jan 15, 2015 7:40 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.15
"Dog-Bone"
- Attachments
-
- CNC_DOGBONE.pdf
- (85.84 KiB) Downloaded 535 times
John Wilson
Skyline Cabinets
Bakersfield, California
TopSolid Wood & Cam
AutoCad 2017
Cabnetware 12
S2M 6
Biesse Rover G 5x12 Flat Table
Weeke ABD 060 Horizontal Boring
Skyline Cabinets
Bakersfield, California
TopSolid Wood & Cam
AutoCad 2017
Cabnetware 12
S2M 6
Biesse Rover G 5x12 Flat Table
Weeke ABD 060 Horizontal Boring
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: "Dog-Bone"
If you model it in design it will automatically calibrate the shape you draw. but if you want to manually do this in cam you can draw a curve in cam and use that as the tool path instead of your model. I am assuming you are machine a 3-D part and not a 2-D curve. just remember that changes in cam do not go to design so best practice is design for cam.
- jhw3
- Private
- Posts: 7
- Joined: Thu Jan 15, 2015 7:40 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.15
Re: "Dog-Bone"
Thanks Todd
I will do it in sketch then.
John
I will do it in sketch then.
John
John Wilson
Skyline Cabinets
Bakersfield, California
TopSolid Wood & Cam
AutoCad 2017
Cabnetware 12
S2M 6
Biesse Rover G 5x12 Flat Table
Weeke ABD 060 Horizontal Boring
Skyline Cabinets
Bakersfield, California
TopSolid Wood & Cam
AutoCad 2017
Cabnetware 12
S2M 6
Biesse Rover G 5x12 Flat Table
Weeke ABD 060 Horizontal Boring