Hi, everyone:
I wanna import 20 kitchens, such as pic show, in one file, to export drafts, and the file is too big to deal with by my computer. So could anyone give me any adivse about the configuration of hardware?
The configuration of My hardware now is intell I7-6700 (3.4G) with CPU, ddr4 (8G) with internal storage, NVIDIA quadro K2200 (4G) with graphics card.
Thank you very much!
Could anyone give me some adivse about hardware?
Moderators: remi77, jacs, Daniel
-
- Corporal
- Posts: 27
- Joined: Tue Feb 28, 2017 3:41 pm
Could anyone give me some adivse about hardware?
Last edited by developing on Sat Oct 28, 2017 4:03 pm, edited 1 time in total.
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: Could anyone give me some adivse about hardware?
the only thing I would suggest is given your currents specs are quite good. is a Solid state hard drive, DDR4 16GB of ram. after your tried those two then look at upgrading the graphics card. But before that have you tried setting up simplified representations and changing your graphical tolerance in the file your inserting the kitchens into? Do you have a laptop or desktop computer?
-
- Second Officer Cadet
- Posts: 209
- Joined: Wed Dec 30, 2015 11:25 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.20
- Contact:
Re: Could anyone give me some adivse about hardware?
Hardware is quite good for this. I have desktop and laptop with i7/16GB ram, large projects running very fine. BUT! If You have some detailed elements in projects (like hinge or drawer runners or adjustable legs), then it can be slow very fast. Like 1-5 hinge is okay, but 20+ hinge bring computer power down. With this type of projects is very important to have very simplified fittings, just to show them in right size and needed drillings.
I do my best to keep fittings file size below 50KB. Some baskets or drawers are ~500KB and when I put 20 of them into project, then it will be slow.
RM
I do my best to keep fittings file size below 50KB. Some baskets or drawers are ~500KB and when I put 20 of them into project, then it will be slow.
RM
-
- Corporal
- Posts: 27
- Joined: Tue Feb 28, 2017 3:41 pm
Re: Could anyone give me some adivse about hardware?
Thank you for your advises, Todd & RaudMees. My computer is desktop, I added another 16G ddr4, simplified the models, and problem solved.