All the assemblies combines together and sum, when display BOM in my file, as the pic show. And then I export the draft by multi-draft, some assemblies which have same properties, combined and have only one draft, but some ones don’t, even though they have same properties.
So my question is how to configurate for multi-draft function, so that the parts/assemblies with same properties have only one draft, just as in BOM file.
How to make parts/assemblies with same properties have only one draft when multi-draft?
Moderators: remi77, jacs, Daniel
-
- Corporal
- Posts: 27
- Joined: Tue Feb 28, 2017 3:41 pm
How to make parts/assemblies with same properties have only one draft when multi-draft?
Last edited by developing on Sun Oct 22, 2017 1:36 pm, edited 3 times in total.
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: How to make parts/assemblies with same properties have only one draft when multi-draft?
Well you will have to create a bom for it but this is where you associate it in the options
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: How to make parts/assemblies with same properties have only one draft when multi-draft?
also I cant see your attached images
-
- Corporal
- Posts: 27
- Joined: Tue Feb 28, 2017 3:41 pm
Re: How to make parts/assemblies with same properties have only one draft when multi-draft?
Hi,Todd
As you said, I've associated the BOM-file to Multi-draft in Parts Selection Sorting, and also in Configuration, but the problem still exist.
As you said, I've associated the BOM-file to Multi-draft in Parts Selection Sorting, and also in Configuration, but the problem still exist.
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: How to make parts/assemblies with same properties have only one draft when multi-draft?
I think if you give the sub-assembly's a Bill of materials index number they should group because if they don't have one they separated on mine
-
- Corporal
- Posts: 27
- Joined: Tue Feb 28, 2017 3:41 pm
Re: How to make parts/assemblies with same properties have only one draft when multi-draft?
These days I have tested lots of assemblies in different orders, and then found out that the problem maybe coursed by parts with same name, they allways have different vlues, and It works ok, when change then with same vlues.