I am trying to find out how to get an ID number for each part that references the unit it belongs to.
I tried using the index but it doesn't carry through to "panels" with edge banding.
Example: I have 18 inserted assemblies that I am releasing to manufacturing as one work order. That creates over 100 parts. How do I identify which unit each part belongs to?
Part Identification
Moderators: remi77, jacs, Daniel
- kerns
- Private
- Posts: 6
- Joined: Fri May 05, 2017 8:20 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.18
- Contact:
Part Identification
Last edited by kerns on Wed Aug 02, 2017 6:00 pm, edited 1 time in total.
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: Part Identification
Multi-level numbering
- Attachments
-
- MULTI-LEVEL.PNG (4.23 KiB) Viewed 55661 times
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: Part Identification
ALSO SET DPETH TO MULTI LEVEL
- Attachments
-
- MULTI-LEVEL2.PNG (4.07 KiB) Viewed 55660 times
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: Part Identification
Then each assembly gets a number and each part get the number of the assembly before the part index
you can change the separator and numbering type in tools options
you can change the separator and numbering type in tools options
- kerns
- Private
- Posts: 6
- Joined: Fri May 05, 2017 8:20 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.18
- Contact:
Re: Part Identification
How do you set that up? and can you control the unit id #?
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: Part Identification
you can set the start value by typing it in but it has limitations
see below for setup:
see below for setup:
- Attachments
-
- Toggle element type to automatic, then multi-level to yes, the select >>
- NUMB AUTO.PNG (7.01 KiB) Viewed 55642 times
-
- set the depth to multi-level then click ok twice
- MULTI-LEVEL2.PNG (4.07 KiB) Viewed 55642 times
- kerns
- Private
- Posts: 6
- Joined: Fri May 05, 2017 8:20 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.18
- Contact:
Re: Part Identification
Thanks Todd! You should be a General! You Rock
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: Part Identification
no problem thanks for the compliment