Is it possible to make a mirror sketch / mirrored plane with TopSolid?
Mirror sketch / mirrored plane
Moderators: remi77, jacs, Daniel
- CAD_73
- Second Officer Cadet
- Posts: 207
- Joined: Thu Oct 30, 2014 11:59 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: The Netherlands
Mirror sketch / mirrored plane
Last edited by CAD_73 on Mon Apr 04, 2016 3:19 pm, edited 1 time in total.
-
- Second Officer Cadet
- Posts: 209
- Joined: Wed Dec 30, 2015 11:25 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.20
- Contact:
Re: Mirror sketch / mirrored plane
Yes, it is. There are different ways how to do that. Most common is duplicate->mirror etc. Also You can use Transform parents->mirror or Repeat->simple mirror.
Read help for more information of those commands, then You can choose best for You.
Read help for more information of those commands, then You can choose best for You.
Re: Mirror sketch / mirrored plane
Hi RaudMees
Be careful, both solutions are working. However, duplication and repetition are two distinct functions
@+
Rémi
Be careful, both solutions are working. However, duplication and repetition are two distinct functions
@+
Rémi
Thanks to use the on the best answer when you've got the solution.
-
- Second Officer Cadet
- Posts: 209
- Joined: Wed Dec 30, 2015 11:25 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.20
- Contact:
Re: Mirror sketch / mirrored plane
Hi Rémi,
that's the reason why I offered to read help for more information about commands I am using those commands very often.
RM
that's the reason why I offered to read help for more information about commands I am using those commands very often.
RM
- CAD_73
- Second Officer Cadet
- Posts: 207
- Joined: Thu Oct 30, 2014 11:59 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: The Netherlands
Re: Mirror sketch / mirrored plane
Works like a charm, thanks RaudMees and remi77.
Gonna test with it
Gonna test with it