Unable to make "Curve-curve intersections point"
Moderators: remi77, jacs, Daniel
Unable to make "Curve-curve intersections point"
Please see the attach files, I'm making a French door and I am unable to create an intersection point on the two curves what would cause this and how would I fix it? Thank you
- Attachments
-
- fancy_door_12a.top
- (16.74 KiB) Downloaded 178 times
Last edited by Robert on Fri Apr 01, 2016 5:34 am, edited 2 times in total.
-
- Second Officer Cadet
- Posts: 209
- Joined: Wed Dec 30, 2015 11:25 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.20
- Contact:
Re: Unable to make "Curve-curve intersections point"
Hello,
If You can, send me a file, I will check. tehnik2tehnik.ee
Meelis
If You can, send me a file, I will check. tehnik2tehnik.ee
Meelis
-
- Private
- Posts: 8
- Joined: Tue Mar 03, 2015 9:14 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.17
Re: Unable to make "Curve-curve intersections point"
Hi Robert, I think the issue is your trying to do an intersection with a thicken curve. Try using an offset contour. In my opinion these type of curves are far easier to do in sketch rather than the curve function.
Chris
Chris
Re: Unable to make "Curve-curve intersections point"
Chris-Thanks for the suggestion, even with the offset curve I could not make the intersection point. I have found issues with splines that are created by bezier and control curves several tools do not work on them, I'm wondering if this is one of them.
Meelis-please see the attached file, thank you.
Meelis-please see the attached file, thank you.
- Attachments
-
- fancy_door_12a.top
- (16.74 KiB) Downloaded 172 times
Re: Unable to make "Curve-curve intersections point"
Robert,
I looked at the file you attached and it seems that your b-spline curve was not originally drawn on the same plane as the rest of your contours. I found a point that had been offset in the Z+ a distance of 0.5in and I'm assuming that's where your issue lies. I modified that distance back to zero and was able to get a point where those 2 curves intersect (see attached file). Hope this helps.
Colson
I looked at the file you attached and it seems that your b-spline curve was not originally drawn on the same plane as the rest of your contours. I found a point that had been offset in the Z+ a distance of 0.5in and I'm assuming that's where your issue lies. I modified that distance back to zero and was able to get a point where those 2 curves intersect (see attached file). Hope this helps.
Colson
- Attachments
-
- fancy_door_12a.top
- (16.59 KiB) Downloaded 165 times
Re: Unable to make "Curve-curve intersections point"
Colson-thank you that was it, I use offset points a lot and must have click "Z" instead of "Y" thanks agian
Last edited by Robert on Fri Apr 01, 2016 5:33 am, edited 1 time in total.
Re: Unable to make "Curve-curve intersections point"
Hi
Thanks to tag your topic as solved
See you
Rémi
Thanks to tag your topic as solved
See you
Rémi
Thanks to use the on the best answer when you've got the solution.