[Solved] simulation tools

CADCAM machining solution: mill-turn centers, milling and turning, kinematics, fixtures, topology recognition, tool library, manufacturing schedules, realistic simulation, workshop sheets, post-processors and DNC...

Moderators: remi77, jacs, Daniel

crervear
Master Corporal
Master Corporal
Posts: 33
Joined: Tue Jun 23, 2009 4:50 pm

[Solved] simulation tools

Unread post by crervear »

Good afternoon, I have a problem with simulation tools, semi-circle, red zone shows fatal. It is a visual defect that would improve, but not how. Deputy picture of what happens.
Greetings
Attachments
simulation tools
simulation tools
User avatar
remi77
Administator
Administator
Posts: 348
Joined: Thu Feb 22, 2007 10:05 am
Contact:

Unread post by remi77 »

Hello,

It's a bit vague :?

In the verify settings -> Tool list. Tick the option ->Use profile, and replay your verification,

thanks to let us know about the following,

See you,

Rémi :wink:
crervear
Master Corporal
Master Corporal
Posts: 33
Joined: Tue Jun 23, 2009 4:50 pm

Unread post by crervear »

Hi Remi, attached photo successful verification.
Thanks for your help.
Cheers and Have a nice day.
Attachments
verificacion OK!!
verificacion OK!!
User avatar
remi77
Administator
Administator
Posts: 348
Joined: Thu Feb 22, 2007 10:05 am
Contact:

Unread post by remi77 »

Hello,

No way, really glad to help you :D crervear

See you,

Rémi :wink:

PS: Don't forget to tag your topic as "SOLVED" when you've got the solution to your problem, I've done it for you this time :wink:
Post Reply