macro spiral milling

CADCAM machining solution: mill-turn centers, milling and turning, kinematics, fixtures, topology recognition, tool library, manufacturing schedules, realistic simulation, workshop sheets, post-processors and DNC...

Moderators: remi77, jacs, Daniel

corne

macro spiral milling

Unread post by corne »

Hi
I have a workpiece with 293 holes in it.
I want to spiral milling the little holes Ø7x3.1
a have nmade a macro to do this. But i need every time to choose a tool
and that fun to do 293 times
Is there someone who can help me?
Attachments
snap.jpg
FormUser15.zip
(1.21 KiB) Downloaded 449 times
User avatar
remi77
Administator
Administator
Posts: 348
Joined: Thu Feb 22, 2007 10:05 am
Contact:

Unread post by remi77 »

Hi ,

I've modified it, thanks to let me know

See you,

Rémi :wink:
Attachments
FormUser133.zip
(1.21 KiB) Downloaded 450 times
corne

Unread post by corne »

This what i already had found.
But is it possible to say that you chose only one time a tool. and that when the hole is the same as the previos one, use the same tool.
Now topsollid use a tool what is not the tool i want to use.
User avatar
remi77
Administator
Administator
Posts: 348
Joined: Thu Feb 22, 2007 10:05 am
Contact:

Unread post by remi77 »

Hello,

In your process, you can add the reference ot the tool ou want to use and not the diameter only,

See you,

Rémi :wink:
Post Reply