Creation tool.

CADCAM machining solution: mill-turn centers, milling and turning, kinematics, fixtures, topology recognition, tool library, manufacturing schedules, realistic simulation, workshop sheets, post-processors and DNC...

Moderators: remi77, Daniel, jacs

Post Reply
crervear
Master Corporal
Master Corporal
Posts: 33
Joined: Tue Jun 23, 2009 4:50 pm

Creation tool.

Post by crervear » Fri Oct 08, 2010 11:40 pm

Hi, I wonder how you can create this tool within TopSolid, I tried several times, most believe as tungsten carbide plate in planned works perfect, but by making a pocket or a contoured interior respects no boundaries and destroys the piece, which will my mistakes in it, attached to features of the tool and me where the configure file and do not run into rough.
Thanks.
Attachments
01.jpg
dfsdfs.cam
model + cam
(2.17 MiB) Downloaded 410 times
R210.pdf
pdf of tool
(47.96 KiB) Downloaded 378 times

User avatar
remi77
Administator
Administator
Posts: 253
Joined: Thu Feb 22, 2007 10:05 am
Contact:

Post by remi77 » Mon Oct 11, 2010 8:36 am

Hello,

Could you please send the *.top files associated with your cam file?

See you,

Rémi :wink:

crervear
Master Corporal
Master Corporal
Posts: 33
Joined: Tue Jun 23, 2009 4:50 pm

Creation tool.

Post by crervear » Tue Oct 12, 2010 3:33 pm

will not let me upload another file to the post, may send it to you by mail?

crervear
Master Corporal
Master Corporal
Posts: 33
Joined: Tue Jun 23, 2009 4:50 pm

Creation tool.

Post by crervear » Thu Oct 14, 2010 3:07 pm

UF
Attachments
dfsdfs.top
archive model
(4 MiB) Downloaded 353 times

User avatar
remi77
Administator
Administator
Posts: 253
Joined: Thu Feb 22, 2007 10:05 am
Contact:

Post by remi77 » Mon Oct 18, 2010 11:32 am

Hi,

Could you check this file please and let me know,

Please download the files at the following link :

http://www.netfun.fr/public/dfsdfs.zip

See you

Rémi :wink:

crervear
Master Corporal
Master Corporal
Posts: 33
Joined: Tue Jun 23, 2009 4:50 pm

Creation tool.

Post by crervear » Mon Oct 18, 2010 3:26 pm

Remi thanks, but I can not open files from the version 6.11
I have version 6.8.272.

User avatar
remi77
Administator
Administator
Posts: 253
Joined: Thu Feb 22, 2007 10:05 am
Contact:

Post by remi77 » Mon Oct 18, 2010 3:43 pm

Hi,

Sorry,

However, there is a problem in your tool definition, be sure to Tool.Diam as Ø63.

I've reexecuted your operation with a new tool, and everything works fine,

See you,

Rémi :wink:
Attachments
dfsdfs-remi_00.jpg
mill.JPG

crervear
Master Corporal
Master Corporal
Posts: 33
Joined: Tue Jun 23, 2009 4:50 pm

Creation tool.

Post by crervear » Mon Oct 18, 2010 4:58 pm

Remi, you could make a tutorial to create the tool correctly, I changed what I think is fine but I still have errors in the result.
Thanks.

User avatar
remi77
Administator
Administator
Posts: 253
Joined: Thu Feb 22, 2007 10:05 am
Contact:

Post by remi77 » Tue Oct 19, 2010 10:56 am

Hi,

Create a section of your mill with a contour and define your Ø63 as Tool.Diam parameter,

See you,

Rémi :wink:

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests