CADCAM machining solution: mill-turn centers, milling and turning, kinematics, fixtures, topology recognition, tool library, manufacturing schedules, realistic simulation, workshop sheets, post-processors and DNC...
Moderators: remi77, jacs, Daniel
-
bernardiann
- Private
- Posts: 8
- Joined: Sun Jan 31, 2010 3:11 pm
Unread post
by bernardiann »
I am having clash on part when using Trochoidal to machine.
Trochoidal radius is set less than the radius of the tool but there is still clash. I have am using the latest update patch! Need help asap.
My tool diameter is 32. My insert has an R of 4.5
stepover is 16.1
loop pitch is 16.1
loop radius is 16.1
Overload ratio set to 100
I am having clashes which I can't be explained.
-
remi77
- Administator
- Posts: 348
- Joined: Thu Feb 22, 2007 10:05 am
-
Contact:
Unread post
by remi77 »
Hi bernardiann
A new patch has just been realeased (6.11.224). Does it fix your problem?
See you,
Rémi
-
bernardiann
- Private
- Posts: 8
- Joined: Sun Jan 31, 2010 3:11 pm
Unread post
by bernardiann »
Hello Remi,
I have
CAD v6.11.224.23
CAM v6.11.224.21
I used this version to generate the CAM.
There's clash with trochoidal
-
remi77
- Administator
- Posts: 348
- Joined: Thu Feb 22, 2007 10:05 am
-
Contact:
Unread post
by remi77 »
Hi ,
Did you reprt that problem to the support?
See you
Rémi