Page 1 of 1
[Solved] Need help!!!
Posted: Mon Mar 29, 2010 7:02 pm
by crervear
no se que significa este emnsaje, alguien me puede ayudar con esto.
Gracias.
not mean this message that someone can help me with this.
Thanks.
Posted: Mon Mar 29, 2010 8:16 pm
by Top'Noob
Hello,
Can you explain what the problem is ?
Posted: Mon Mar 29, 2010 8:57 pm
by crervear
I need to know if that message saying TopSolid is dangerous for machining, which means I do not understand. This came to modify a tool radiated.
Posted: Tue Mar 30, 2010 9:25 am
by remi77
Hi,
You should give more details concerning your problem,
See you
Rémi
Posted: Tue Mar 30, 2010 9:49 am
by remi77
Hello,
Your problem can appear in this case :
You make a contouring with an end mill, for any reason you decide to change your tool for a ball mill. In this case TopSolid 'Cam will not find the driven point (corrector) of your tool, and you'll get this warning.
For conlusion, generally you get this this message when TopSolid 'Cam uses a driven which is not affected,
I hoope I've been clear,
See you,
Rémi
Posted: Tue Mar 30, 2010 2:31 pm
by crervear
is totally cleared up the doubt.
thank you very much for the clear explanation.
bye
Posted: Tue Mar 30, 2010 3:05 pm
by remi77
Hello,
If it can help, glad to help you
See you
Rémi
need help v.2.0
Posted: Wed Feb 02, 2011 4:55 pm
by crervear
taking up this issue, the problem now is that I present are two guiding points of the tool, I want to know how to delete one or fix the issue, right when post-processing operations with the tool. (An operation of planned and another roughing 2d) the first operation to spell out "0" and the second correction for the number of the tool, because as the photo shows the spell is setted to "0", and want to edit will not let me choose the same spell that is already used by the condition "inferior."