[Solved] Need help!!!

CADCAM machining solution: mill-turn centers, milling and turning, kinematics, fixtures, topology recognition, tool library, manufacturing schedules, realistic simulation, workshop sheets, post-processors and DNC...

Moderators: remi77, Daniel, jacs

Post Reply
crervear
Master Corporal
Master Corporal
Posts: 33
Joined: Tue Jun 23, 2009 4:50 pm

[Solved] Need help!!!

Post by crervear » Mon Mar 29, 2010 7:02 pm

no se que significa este emnsaje, alguien me puede ayudar con esto.
Gracias.

not mean this message that someone can help me with this.
Thanks.
Attachments
punto de guiado..JPG

Top'Noob
First Officer Cadet
First Officer Cadet
Posts: 245
Joined: Fri Jun 15, 2007 3:05 pm

Post by Top'Noob » Mon Mar 29, 2010 8:16 pm

Hello,

Can you explain what the problem is ?

crervear
Master Corporal
Master Corporal
Posts: 33
Joined: Tue Jun 23, 2009 4:50 pm

Post by crervear » Mon Mar 29, 2010 8:57 pm

I need to know if that message saying TopSolid is dangerous for machining, which means I do not understand. This came to modify a tool radiated.

User avatar
remi77
Administator
Administator
Posts: 253
Joined: Thu Feb 22, 2007 10:05 am
Contact:

Post by remi77 » Tue Mar 30, 2010 9:25 am

Hi,

You should give more details concerning your problem,

See you

Rémi :wink:

User avatar
remi77
Administator
Administator
Posts: 253
Joined: Thu Feb 22, 2007 10:05 am
Contact:

Post by remi77 » Tue Mar 30, 2010 9:49 am

Hello,

Your problem can appear in this case :

You make a contouring with an end mill, for any reason you decide to change your tool for a ball mill. In this case TopSolid 'Cam will not find the driven point (corrector) of your tool, and you'll get this warning.

For conlusion, generally you get this this message when TopSolid 'Cam uses a driven which is not affected,

I hoope I've been clear,

See you,

Rémi :wink:

crervear
Master Corporal
Master Corporal
Posts: 33
Joined: Tue Jun 23, 2009 4:50 pm

Post by crervear » Tue Mar 30, 2010 2:31 pm

is totally cleared up the doubt.
thank you very much for the clear explanation.

bye

User avatar
remi77
Administator
Administator
Posts: 253
Joined: Thu Feb 22, 2007 10:05 am
Contact:

Post by remi77 » Tue Mar 30, 2010 3:05 pm

Hello,

If it can help, glad to help you 8)

See you

Rémi :wink:

crervear
Master Corporal
Master Corporal
Posts: 33
Joined: Tue Jun 23, 2009 4:50 pm

need help v.2.0

Post by crervear » Wed Feb 02, 2011 4:55 pm

taking up this issue, the problem now is that I present are two guiding points of the tool, I want to know how to delete one or fix the issue, right when post-processing operations with the tool. (An operation of planned and another roughing 2d) the first operation to spell out "0" and the second correction for the number of the tool, because as the photo shows the spell is setted to "0", and want to edit will not let me choose the same spell that is already used by the condition "inferior."
Attachments
01.jpg

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests