[solved]reaming a hole
Moderators: remi77, jacs, Daniel
[solved]reaming a hole
hi
when a reaming a hole a want that the F feetrate down is slow and the feetrate up is high fore the mazak is feetrate up E
i do not know howe make this possible in the post
here are the lines what about reaming
// **************** CYCLI *****************
[DEFINE_CYCLE,CALL,BORING]
#bloc = SUB,[DEFINE_CYCLE,CALL,BORING,FINISH][?IS_TOOL_CLASS=BORE REAM];
#bloc = YES,[#CYCLE=85][#CYC_RETRACT_TYPE][GOTO_X][GOTO_Y][GOTO_Z][GOTO_C][#CYC_APPROACH][FEEDRATE];
when a reaming a hole a want that the F feetrate down is slow and the feetrate up is high fore the mazak is feetrate up E
i do not know howe make this possible in the post
here are the lines what about reaming
// **************** CYCLI *****************
[DEFINE_CYCLE,CALL,BORING]
#bloc = SUB,[DEFINE_CYCLE,CALL,BORING,FINISH][?IS_TOOL_CLASS=BORE REAM];
#bloc = YES,[#CYCLE=85][#CYC_RETRACT_TYPE][GOTO_X][GOTO_Y][GOTO_Z][GOTO_C][#CYC_APPROACH][FEEDRATE];
Last edited by corne on Tue Apr 06, 2010 8:39 am, edited 3 times in total.
- flavio_ruivo
- Master Corporal
- Posts: 32
- Joined: Thu Mar 01, 2007 12:09 pm
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 7.6
- Location: Leiria-Portugal
- Contact:
Hi,
You look in the Machine Manual if it's possible? and How is the Cycle Format?
Can you post here the machine cycle to do that?
Best regards
Flávio Ruivo
http://www.photoniko.blogspot.com
You look in the Machine Manual if it's possible? and How is the Cycle Format?
Can you post here the machine cycle to do that?
Best regards
Flávio Ruivo
http://www.photoniko.blogspot.com
- flavio_ruivo
- Master Corporal
- Posts: 32
- Joined: Thu Mar 01, 2007 12:09 pm
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 7.6
- Location: Leiria-Portugal
- Contact:
Hi,
If you put [#SPECIFIC=E300] in the end of line, you have this value, but is always E300, it's this what you want?
[DEFINE_CYCLE,CALL,BORING]
#bloc = SUB,[DEFINE_CYCLE,CALL,BORING,FINISH][?IS_TOOL_CLASS=BORE REAM];
#bloc = YES,[#CYCLE=85][#CYC_RETRACT_TYPE][GOTO_X][GOTO_Y][GOTO_Z][GOTO_C][#CYC_APPROACH][FEEDRATE][SPECIFIC=E300];
Best Regards
Flávio Ruivo
http://www.photoniko.blogspot.com
If you put [#SPECIFIC=E300] in the end of line, you have this value, but is always E300, it's this what you want?
[DEFINE_CYCLE,CALL,BORING]
#bloc = SUB,[DEFINE_CYCLE,CALL,BORING,FINISH][?IS_TOOL_CLASS=BORE REAM];
#bloc = YES,[#CYCLE=85][#CYC_RETRACT_TYPE][GOTO_X][GOTO_Y][GOTO_Z][GOTO_C][#CYC_APPROACH][FEEDRATE][SPECIFIC=E300];
Best Regards
Flávio Ruivo
http://www.photoniko.blogspot.com
hi
when i ream one hole it work good.
But now i want to ream two holes with two different dept.
the second hole goes with a feedrade of 300
look to the example
(VASTE RUIMER 10H7)
T24T00M06
G91G28Z0
G90
M03S223
N30
X85.Y33.M08
G43Z15.H24
X85.Y33.
X85.Y33.Z2.
G85G99Z-27.242R2.F33E300
Y-33.
G80
N40
G00X14.Y33.
G85G99Z-27.78R2.E300
Y-33.
G80
N50
G00X-85.Y33.
G85G99Z-26.345R2.E300
Y-33.
G80
G00Z15.M09
G91G28Z100M05
in the second ream cyclus is the "F" gone
is there a way to set alwasy a feedrate of "F"?
this is the line in the post.
#bloc = YES,[#CYCLE=85][#CYC_RETRACT_TYPE][GOTO_X][GOTO_Y][GOTO_Z][GOTO_C][#CYC_APPROACH][FEEDRATE][SPECIFIC=E300];
when i ream one hole it work good.
But now i want to ream two holes with two different dept.
the second hole goes with a feedrade of 300
look to the example
(VASTE RUIMER 10H7)
T24T00M06
G91G28Z0
G90
M03S223
N30
X85.Y33.M08
G43Z15.H24
X85.Y33.
X85.Y33.Z2.
G85G99Z-27.242R2.F33E300
Y-33.
G80
N40
G00X14.Y33.
G85G99Z-27.78R2.E300
Y-33.
G80
N50
G00X-85.Y33.
G85G99Z-26.345R2.E300
Y-33.
G80
G00Z15.M09
G91G28Z100M05
in the second ream cyclus is the "F" gone
is there a way to set alwasy a feedrate of "F"?
this is the line in the post.
#bloc = YES,[#CYCLE=85][#CYC_RETRACT_TYPE][GOTO_X][GOTO_Y][GOTO_Z][GOTO_C][#CYC_APPROACH][FEEDRATE][SPECIFIC=E300];
- flavio_ruivo
- Master Corporal
- Posts: 32
- Joined: Thu Mar 01, 2007 12:09 pm
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 7.6
- Location: Leiria-Portugal
- Contact:
hi
Hi Corne,
If you put # before FEEDRATE you force the Pp:
[#FEEDRATE]
#bloc = YES,[#CYCLE=85][#CYC_RETRACT_TYPE][GOTO_X][GOTO_Y][GOTO_Z][GOTO_C][#CYC_APPROACH][#FEEDRATE][SPECIFIC=E300];
Tell me if this it´s ok for you?
Best regards
Flávio Ruivo
If you put # before FEEDRATE you force the Pp:
[#FEEDRATE]
#bloc = YES,[#CYCLE=85][#CYC_RETRACT_TYPE][GOTO_X][GOTO_Y][GOTO_Z][GOTO_C][#CYC_APPROACH][#FEEDRATE][SPECIFIC=E300];
Tell me if this it´s ok for you?
Best regards
Flávio Ruivo