I would like to change some of my default setting, to some that I use all the time, like to change from (flood) M8 to (mist) since my 5 axis does not have flood coolant.
Other change maybe spindle speed, fed rate, ect,ect....
thanks
[Solved] Change default setting......
Moderators: remi77, jacs, Daniel
- flavio_ruivo
- Master Corporal
- Posts: 32
- Joined: Thu Mar 01, 2007 12:09 pm
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 7.6
- Location: Leiria-Portugal
- Contact:
-
- Master Corporal
- Posts: 30
- Joined: Thu Sep 17, 2009 1:55 am
- Location: GREENFIELD, TN.
- Contact:
setting defaults
Hello, Flavio_Ruivo
Thank you for your help
Stephen
Thank you for your help
Stephen
-
- Master Corporal
- Posts: 30
- Joined: Thu Sep 17, 2009 1:55 am
- Location: GREENFIELD, TN.
- Contact:
defaults
Hello again,
After getting a chance to change my Default setting, I do not see Change Default values in the Menu> Edit, I do see in, File> Properties some setting there, but not what I'm looking for.
Also where is Toptool?
I'm new to this Software.. even if I go to the Help Menu, I do not see any help on changing defaults or TopTool.
best regards
Stephen
After getting a chance to change my Default setting, I do not see Change Default values in the Menu> Edit, I do see in, File> Properties some setting there, but not what I'm looking for.
Also where is Toptool?
I'm new to this Software.. even if I go to the Help Menu, I do not see any help on changing defaults or TopTool.
best regards
Stephen
- flavio_ruivo
- Master Corporal
- Posts: 32
- Joined: Thu Mar 01, 2007 12:09 pm
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 7.6
- Location: Leiria-Portugal
- Contact:
hi
Hi,
To acess to this menu: Edit>Change default values you need to have the CAM icons active..
In TopTool to edit the cutting conditions you must go to:
Menu: Tools definition>Linked tools>General>Cutting conditions and here you define the Feedrate (Fz) and Cutting Speed (Vc) for which tool and for which material..
If you need more help, only ask ok
Best regards
Flávio Ruivo
To acess to this menu: Edit>Change default values you need to have the CAM icons active..
In TopTool to edit the cutting conditions you must go to:
Menu: Tools definition>Linked tools>General>Cutting conditions and here you define the Feedrate (Fz) and Cutting Speed (Vc) for which tool and for which material..
If you need more help, only ask ok
Best regards
Flávio Ruivo