Edges

CADCAM machining solution: mill-turn centers, milling and turning, kinematics, fixtures, topology recognition, tool library, manufacturing schedules, realistic simulation, workshop sheets, post-processors and DNC...

Moderators: remi77, jacs, Daniel

Post Reply
crervear
Master Corporal
Master Corporal
Posts: 33
Joined: Tue Jun 23, 2009 4:50 pm

Edges

Post by crervear » Mon Jul 27, 2015 2:00 am

hello, greetings, I have a problem when processing a file post feeler machine
TopSolid edges in the sharp visualize., but the post-processing file the rounded edges.
That will be what is wrong?
I need your help ...

Thanks in advance

Mark Oostveen
Chief
Chief
Posts: 107
Joined: Mon Mar 26, 2007 9:40 am
TopSolid Module: TopSolid'Cam
TopSolid Version: 7.8
Location: The netherlands
Contact:

Re: Edges

Post by Mark Oostveen » Mon Jul 27, 2015 1:20 pm

Are you using cutter compensation original or compensated mode? If yes show me the NC-code. It is well possible that it is not the NC code but the machine which rounds the corners.

Grz Mark

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests