[Solved] About AutoForm in Progress .

Progress CAD software solution for punching and bending tools: recognition of sheet metal parts, part unfolding, creation of strips, standard and advanced parts library, component and process library, control via tool levels, drawings...

Moderators: remi77, jacs, Daniel

User avatar
plusqq
Corporal
Corporal
Posts: 23
Joined: Wed Mar 21, 2007 6:12 am
Location: shenzhen city

[Solved] About AutoForm in Progress .

Unread post by plusqq »

now in TopSolid there are two levels for AutoForm functions , one is BlankWizard(AF1), the other is FormingWizard(AF2).
in TopSolid'progress2007, there is a new option in blankwizard, means to get projection curve of unstamping result.
Image

like this : ( could be used this function?)
Image
Vincent
Private
Private
Posts: 8
Joined: Fri Nov 16, 2007 10:23 am

Unread post by Vincent »

projection surface is only unlocked by AF2 if it is your question.

This allows you to create intermediate steps of unfolding to get your unbend part.
User avatar
jehronimo
Major
Major
Posts: 149
Joined: Thu Mar 01, 2007 1:05 pm

Unread post by jehronimo »

Ugh',

Yes, you need the AF2 code to allow the use for these function...

Jehronimo
User avatar
plusqq
Corporal
Corporal
Posts: 23
Joined: Wed Mar 21, 2007 6:12 am
Location: shenzhen city

Unread post by plusqq »

i see.
Post Reply