TopSolid'Mold Tutorial
Moderators: remi77, jacs, Daniel
- Bill
- Master Chief
- Posts: 115
- Joined: Wed Feb 21, 2007 8:17 pm
- TopSolid Module: TopSolid'Design
- TopSolid Version: 6.25
- Location: Chicago
- Contact:
TopTool
Hey Matt,
I am happy to hear that the tip worked out for you.
As for my Avatar, it is a small sample project of a Gas power RC dune buggy that I put together. I am currently working on builiding a tutorial for this project. The tutorial will be step by step instructions for designing the front end components, assembling them and then assembling the Front end into the rest of the Main assembly. From there it will walk you through exploded assembies and draft. This will be written to follow suite with the TopSolid'Mold tutorial that I created. The mold tutorial is a 300+ page tutorial that walks you through designing a 2 cavity mold with side actions, lifters, water, ejection...basically it reviews almost the entire product. Let me know if you would like a copy of this.
I am happy to hear that the tip worked out for you.
As for my Avatar, it is a small sample project of a Gas power RC dune buggy that I put together. I am currently working on builiding a tutorial for this project. The tutorial will be step by step instructions for designing the front end components, assembling them and then assembling the Front end into the rest of the Main assembly. From there it will walk you through exploded assembies and draft. This will be written to follow suite with the TopSolid'Mold tutorial that I created. The mold tutorial is a 300+ page tutorial that walks you through designing a 2 cavity mold with side actions, lifters, water, ejection...basically it reviews almost the entire product. Let me know if you would like a copy of this.
Happy Designing
Bill
Technical Director
Missler Software Inc
Bill
Technical Director
Missler Software Inc
- Matt Berube
- Master Corporal
- Posts: 45
- Joined: Wed Feb 21, 2007 7:08 pm
- Location: Connecticut, USA
- Bill
- Master Chief
- Posts: 115
- Joined: Wed Feb 21, 2007 8:17 pm
- TopSolid Module: TopSolid'Design
- TopSolid Version: 6.25
- Location: Chicago
- Contact:
I'll see what I can do
Hey Matt,
I will work with David to see about making this downloadable from the forum site.
have a good week!
I will work with David to see about making this downloadable from the forum site.
have a good week!
Happy Designing
Bill
Technical Director
Missler Software Inc
Bill
Technical Director
Missler Software Inc
- Bill
- Master Chief
- Posts: 115
- Joined: Wed Feb 21, 2007 8:17 pm
- TopSolid Module: TopSolid'Design
- TopSolid Version: 6.25
- Location: Chicago
- Contact:
Re: Tutorials
Hey Digital,
I will see what I can do.
I will see what I can do.
Happy Designing
Bill
Technical Director
Missler Software Inc
Bill
Technical Director
Missler Software Inc
- RICHARD LALONDE
- Sergeant
- Posts: 68
- Joined: Fri Feb 23, 2007 2:07 pm
- Location: Montreal
- Contact:
everything about TopSolid'Mold
I'd love to get this tutorial too, sounds like a huge deal - 300+ pages!
I think this is available via TopSolid ftp here:
ftp://anonymous:user%40host.com@ftp.top ... SolidMold/
ftp://anonymous:user%40host.com@ftp.top ... SolidMold/
- Matt Berube
- Master Corporal
- Posts: 45
- Joined: Wed Feb 21, 2007 7:08 pm
- Location: Connecticut, USA
- Bill
- Master Chief
- Posts: 115
- Joined: Wed Feb 21, 2007 8:17 pm
- TopSolid Module: TopSolid'Design
- TopSolid Version: 6.25
- Location: Chicago
- Contact:
Hey Guys,
I see that you have found the tutorial. Please send me some feed back once you are through with it. Let me know what you liked and what you didn't like about the tutorial. Please let me know if the flow of it made sense and was easy to work with. Any feed back would be greatly appreciated so that my next tutorial is even better!
thanks much!
I see that you have found the tutorial. Please send me some feed back once you are through with it. Let me know what you liked and what you didn't like about the tutorial. Please let me know if the flow of it made sense and was easy to work with. Any feed back would be greatly appreciated so that my next tutorial is even better!
thanks much!
Happy Designing
Bill
Technical Director
Missler Software Inc
Bill
Technical Director
Missler Software Inc
- Matt Berube
- Master Corporal
- Posts: 45
- Joined: Wed Feb 21, 2007 7:08 pm
- Location: Connecticut, USA
Bill,
Now that you've asked for feedback, I intend to really go through it completely once I get my hands on 6.8
I was patiently waiting to receive it but now I guess I am irritably waiting for it.
I went through a lot of it with 6.7 but decided to wait for the latest version.
Now that you've asked for feedback, I intend to really go through it completely once I get my hands on 6.8
I was patiently waiting to receive it but now I guess I am irritably waiting for it.
I went through a lot of it with 6.7 but decided to wait for the latest version.
TopSolid 2006, Design 6.7.302, Cam 6.7.302, Mold 6.7.302
Mastercam X2, Mill3, Wire, Solids, Moldplus, Beta Tester
Mastercam X2, Mill3, Wire, Solids, Moldplus, Beta Tester
- Bill
- Master Chief
- Posts: 115
- Joined: Wed Feb 21, 2007 8:17 pm
- TopSolid Module: TopSolid'Design
- TopSolid Version: 6.25
- Location: Chicago
- Contact:
Hey Matt,
It seems strange that you have not recieved the 2007 version. We have shipped it out to all of our customers. If you don't recieve it this week, send me an email, (bill@clear-cut.com) and I will see if I can speed it along for you.
It seems strange that you have not recieved the 2007 version. We have shipped it out to all of our customers. If you don't recieve it this week, send me an email, (bill@clear-cut.com) and I will see if I can speed it along for you.
Happy Designing
Bill
Technical Director
Missler Software Inc
Bill
Technical Director
Missler Software Inc
- Matt Berube
- Master Corporal
- Posts: 45
- Joined: Wed Feb 21, 2007 7:08 pm
- Location: Connecticut, USA