Just curious if anyone has had problems with missing toolbars.
My Work Toolbar is now missing.
This is the toolbar that shows different options after you select on
Curves
Sketch
Shapes
Surface
etc.
For example if you were to click on your surfaces on the left hand toolbar
Optins such as extrude, drilling, etc will show up.
I currently today have not been able to access those options.
I can't measure by centre or middle point.
has anyone else had this problem?
how do I fix
[Solved] Work Bar?
Moderators: remi77, jacs, Daniel
I started having a similar issue as of a couple patch revisions ago. My issue was not the same toolbar though. It seemed to be mostly the quick layer bar and the quick line styles that would disappear for no reason.
I think the most recent patches have addressed it because I have not seen this for a while now.
I think the most recent patches have addressed it because I have not seen this for a while now.
- Bill
- Master Chief
- Posts: 115
- Joined: Wed Feb 21, 2007 8:17 pm
- TopSolid Module: TopSolid'Design
- TopSolid Version: 6.25
- Location: Chicago
- Contact:
Hi Jeff,
This can happen from time to time... It has even happened to me!
The reason it happens is typically because you are moving quickly, and accidentally drag the icon bar to a new position. That said, here is how you fix it. (it has nothing to do with a patch)
Go to the Window pull down menu.
If there is a check mark next to "Save Configuration when leaving", select this option.
Now go back to the window pull down menu, and choose Reset Configuration.
Now go back to the Window pull down menu and choose "Save Configuration now".
If you have any files open that need to be saved, save them and exit TopSolid.
Restart TopSolid...and now all should be fixed.
This can happen from time to time... It has even happened to me!
The reason it happens is typically because you are moving quickly, and accidentally drag the icon bar to a new position. That said, here is how you fix it. (it has nothing to do with a patch)
Go to the Window pull down menu.
If there is a check mark next to "Save Configuration when leaving", select this option.
Now go back to the window pull down menu, and choose Reset Configuration.
Now go back to the Window pull down menu and choose "Save Configuration now".
If you have any files open that need to be saved, save them and exit TopSolid.
Restart TopSolid...and now all should be fixed.
Happy Designing
Bill
Technical Director
Missler Software Inc
Bill
Technical Director
Missler Software Inc