CAD solution for mold making: slider design, guide rails, jacks,
mold base, components and process, coolant circuit, control via mold levels, creation of drawings, parts lists...
Moderators: remi77 , jacs , Daniel
0 Replies
255370 Views
Last post by D@vid
Tue Sep 30, 2014 5:48 pm
trimming return pins
Replies: 12
by
Jimmy »
Thu Dec 06, 2007 6:48 pm
First post
my return pins won't trim up to the surface. I have 6 return pins and was able to trim only 1 out of 6. I dropped a ucs at the center and depth of...
Last post
Another way is
You could modify the length of the pin (to be same distance as KO to PL) inside the compo parameter, but you have to be careful with...
12 Replies
11993 Views
Last post by RICHARD LALONDE
Mon Dec 10, 2007 4:21 pm
driving elements come back
Replies: 3
by
Jimmy »
Thu Dec 06, 2007 8:20 pm
First post
one more thing. I hid all of my driving elements so it's easier to see. Then I go into visualization and shut off all the items in my components...
Last post
Usually the location dimensions & UCS's used to insert mold components (like a bolt) will unblank themselves when you use mold visualization. The...
3 Replies
5803 Views
Last post by Larry M.
Fri Dec 07, 2007 1:50 pm
Screw section
Replies: 3
by
RICHARD LALONDE »
Wed Nov 28, 2007 11:11 pm
First post
This is a link to the French Forum to refer to all picture
Does someone have the same problem with thread visualisation when you cut an assembly...
Last post
I'm lucky because I could discuss on both forum,
The answer is Missler know about this problem and they working on that, we are sure they will be...
3 Replies
5468 Views
Last post by RICHARD LALONDE
Thu Nov 29, 2007 5:11 pm
TopSolid'Mold Tutorial
Replies: 17
by
Bill »
Tue Mar 13, 2007 3:05 pm
First post
Hey Matt,
I am happy to hear that the tip worked out for you. :D
As for my Avatar, it is a small sample project of a Gas power RC dune buggy that...
Last post
Hi TopSolid users,
Just to inform you that this TS'Mold tutorial book is now available on sale here:
Will be soon on amazon.co.uk
Enjoy!
17 Replies
27058 Views
Last post by D@vid
Fri Nov 23, 2007 3:33 pm
Hey! Where did it go? (unite question)
Replies: 4
by
Jenny »
Wed Nov 07, 2007 2:02 pm
First post
I would like to unite my core block bottom (original block created after parting line) to my core mold base. The problem I'm experiencing is that any...
Last post
Hello,
I think that for you the different steps would be:
Create your first CC blocks
Insert the moldbase in your file, on the correct frame
Start...
4 Replies
6715 Views
Last post by jehronimo
Wed Nov 07, 2007 5:12 pm
[Solved] DME Inch and PCS Locating Rings Position is Wrong
Replies: 8
by
TopSolid2007 »
Fri Sep 21, 2007 5:26 pm
First post
DME Inch and PCS Inch Locating Rings Position is Wrong.
When I try to draw a moldbase by DME or PCS the locating ring stay inside the TCP plate and...
Last post
Hello Richard,
The Flat Head Cap Screws have also been modified in the upcoming 240 patch to be drawn correctly, and thus the process should also...
8 Replies
9040 Views
Last post by Bill
Tue Nov 06, 2007 5:31 pm
[Solved] Multi-cavity issue
Replies: 3
by
Jenny »
Tue Oct 30, 2007 4:56 pm
First post
I want to create a two cavity mold using the multi-cavity function.
The part is to be rotated, and not mirrored. There isn't a rotate function...
Last post
Hello Jenny!
from what I have read, you have been given good advice as to how to handle the multi cavity.
The only point that I will add is that...
3 Replies
5390 Views
Last post by Bill
Fri Nov 02, 2007 6:08 pm
Shift part
Replies: 3
by
Stockwell »
Wed Oct 31, 2007 1:47 pm
First post
Going to be alot of questions I am sure here as Oldcastle, Ontario starts using Top Solid for Mold design.
Question
UCS for part, UCS for parting...
Last post
Got it relocated guys, thanks for looking at the file Larry!
Don
3 Replies
5360 Views
Last post by Stockwell
Wed Oct 31, 2007 4:08 pm
[Solved] Angle pin problem
Replies: 2
by
RICHARD LALONDE »
Thu Oct 25, 2007 3:19 pm
First post
Does some one have problem to place an angle pin ?
The problem I got is I have a cam stroke and is on good direction when I validate stroke.
When I...
Last post
Effectively the first time it was because my cam travel was on the wrong side. But after I replace the datum of my slide and not redo the complete...
2 Replies
4681 Views
Last post by RICHARD LALONDE
Mon Oct 29, 2007 6:46 pm
[Solved] HASCO INCH Mold Bases are wrong.
Replies: 3
by
Larry M. »
Sat Sep 15, 2007 2:58 am
First post
All, and I do mean all, of the Hasco Inch Library mold bases use the wrong Pin and bushings. Hasco always uses a stepped Leader Pin. So when they...
Last post
Just so you know, these libary problems have been reported and corrections will be worked on over the coming months. Just wanted to let you guys know...
3 Replies
5818 Views
Last post by Bill
Tue Oct 02, 2007 9:17 pm
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum