TopSolid'Forum

Hi, For me, it does not make sense, that is why i do not use this option :) The problem is : with the "contour" creation, there is no beginning, no end, so how the system can know what entities to hide? The best solution in this way, is to use the Driving elements command that will let you...

Hello,

Do you notice that you have in the function Create contour some options? You can set them by >>...There is an option, Make curve invisible=...probably on your PC this value is set to YES...And it has to be = NO to let the construction curve visible.

Jehronimo

That is mean, Missler did it as a compo multi body and that is impossible to separate a compo did that way, bcs when you import a compo you import it as is. Hello guys, yes it is a multi body compo, but you can assign each body to the side you want! I am doing it today, why it would not work for yo...

Hi, Do you know that since the previous version (V67), it is possible to assign each element of the tapered lock (or taper block) to the side you need? I had seen it during the novelties training last year...To be able to do it, you may have to use the detection tool to be able to select the side yo...

Hi,


In Tools | Options, you can enable/disable this option by switching both items on the Document update area...

Jehronimo

Hello, Please do not cry :D So about your problem, what do you want to do :?: I do not really understand your request, because I do not have a lot of problems to do what you want (of course if I understand correctly your request 8) ) You just have to insert your components on a die base, and save it...

Hello, And what is your "last" update?? The V6.8.216?? One thing you can try is: * Start TS * Close the "open file" window (you will only display the 3 menus File, Window and Help ) * Go in Window | Reset configuration * Close TS without any saves * Start again I had this kind of...

Hi,

The same problem for me. As Francois said, it works in french forum, but I have the same error message on the international forum

Jehronimo

Hello,

You can have a look in this area

ftp://ftp.TopSolid.com/public/TopSolid/v6.8/Patch/

I guess you will find your answer

Jehronimo

Hello Raghav,

The suggestion of Digital is the best idea, because the error message is always the same, and does not really inform you about what happened just before the crash

Submit your problem to Missler, for a deeper analysis.

Jehronimo

Hi,

I am sorry, I did not check it before replying, but it works only in 6.8

"Oups" !!

Jehronimo

Hi, You have to understand that a lot of keywords are only the "txt" translations of options you activate in Tools | Options ...So sometimes it is a better idea :idea: to go in this dialog bow than in the cfg files... If you go in the area Interfaces | Parasolid | Export , you will see an ...

Hi,

you just have to use the Analyze | Normal function, and go in Draft mode....

The TopSolid'Mold draft analysis works only to measure the correct angle of a specific face, and to check the faces that are included between 0 and the value you entered

Jehronimo

Hi,

Thanks a lot for the "trick" about the current UCS with the compass, I did not know it Great!

Jehronimo