TopSolid'Forum

Hi,

please check if you have your configuration like this.
It should work fine.

Cumprimentos,

Olaio

Hi,

Does anyone Know how can we get the paper format of a TopDraft Document using C#, VB, Delphi ...?

Cumprimentos,

Olaio

Hi Jeff,

Regarding notebooks, i have one with an intel processor Core 2 Duo T7500 witch is much better than a PC that i had with an AMD dual core processor.
Another very important component is the graphic card. please do NOT use any other card than nvidia.

Cumprimentos,
Olaio

Hi, It seems that some times you miss a step. This step is activated the "COPY OPERATION" button that appears when you create the groove. If you do not click on it, TS launch the groove operation like it was the first time. You need to do it to ALL the grooves. A tip, to activate the "...

Hi,

can you upload your file?

Hi Richard,

I agree with you.
Even if the dowel pin used is .2465 i believe that the process should be a hole with .25 H7 (or H5) right? This process in fact should be the same for both pins.

Cumprimentos,
Olaio

Hi,

Maybe it is not the right way but it is a way that work.

First, you need to set the index of each part in the 3D file.
Then in your 2D drawing create another bom (flat bom). Use this second bom to make the automatic bom index.

Cumprimentos,
Olaio

Hi,

You can create predefined notes or predefined texts in the "Tools -> Options". So a dropdown list will be availlable when you create/modify a text/note.

Cumprimentos,
Olaio

Hi

We are working with Vista (32 and 64bits) with TopSolid'Mold.
The major problems are the drivers for printers and for some graphic cards.
But generally TopSolid Works "well" in Vista (when Vista is also working well ).

Cumprimentos,

Olaio

Hi, How can i create a command to insert an existing bitmap in a Draft document? In this code i want to define the size, position, and path of the bitmap, so running this command the bitmap should appear automatically where it was defined in the code. This situation will be used to insert signatures...

Hi Larry, Just trying to help, or not :) . Have you try to make the crossing section directly in the 3D mold file? The boolean failled in the 2D should indicate you what part gives the error. If you create the section contour in the 3D mold file and try to trim by sweeping curve all the parts in the...

Hello, First of all what kind of dimension you use, and what do you want to create? Anyway here comes some tips for you: The important thing is to create the projected views with the option "Views create 2d curves" selected (from File->Properties->Projection parameters). Center lines - use...

Hi,

the easy way (for me) it is to use the option "File -> mail to"
TopSolid will create a zip file with your document and all the referenced documents (your standards and TS standards).



Cumprimentos,

Olaio

Hi Ratatui, Your problem is that the vertexes (corners insine the big cube) )are exactly in the same position, and parasolid or others kernels does not like this situation. To be abble to do the subtract, just change the extrude lenght of the small cube to 9.9999 (i am sure that it will be no proble...

Hi Larry,

I use both. We work with very heavy molds (in terms of complexes geometries). We start the project in TS x32 (we have also the 3GT application installed) and then switch to TS x64 only when necessary.

Cumprimentos,

Olaio